Skip to content
AfriScienceGroup home
Power and Electrical

Substation Design, Installation, Commissioning and Maintenance

A substation is where a network's reliability is largely decided, and most of the decisions are made at design and never revisited. This course runs the full lifecycle. Delegates work through layout and busbar configuration and the availability each arrangement delivers, primary plant selection, earthing and lightning protection design, and auxiliary supplies including battery and charger sizing. Installation and commissioning cover the tests that must pass before energisation and the documentation that has to exist afterwards. The course closes on maintenance strategy and the practical constraints of working on an energised substation, and addresses the conditions common to the region including dust, high ambient temperature and constrained outage windows.

Course objectives

  • Select a busbar configuration against the availability required
  • Specify primary plant appropriate to the duty and the environment
  • Design earthing and lightning protection for a substation
  • Size auxiliary supplies including batteries and chargers
  • Plan installation and the commissioning tests required before energisation
  • Produce the documentation the station will be operated from
  • Build a maintenance strategy that works within available outage windows

Who should attend

  • Substation design and project engineers
  • Utility and industrial electrical engineers
  • Commissioning engineers
  • Consulting engineers
  • Maintenance and operations engineers

Course outline

  1. 01Substation layouts and busbar configurations
  2. 02Availability and redundancy by arrangement
  3. 03Primary plant selection and environmental duty
  4. 04Earthing and lightning protection design
  5. 05Auxiliary supplies, batteries and chargers
  6. 06Installation practice
  7. 07Commissioning tests before energisation
  8. 08Documentation, maintenance strategy and outage constraints

Scheduled sessions

Scheduled sessions for Substation Design, Installation, Commissioning and Maintenance
DatesVenueFormatPriceRegister
19 to 23 October 2026Harare, ZimbabweClassroomUSD 1,325 per delegateRegister Now
14 to 18 December 2026Pretoria, South AfricaClassroomR19,950 per delegateRegister Now
8 to 12 February 2027OnlineOnlineR8,500 per delegateRegister Now
15 to 19 March 2027Maseru, LesothoClassroomR19,950 per delegateRegister Now

Substation Design, Installation, Commissioning and Maintenance

From R8,500

AskRegister