Skip to content
AfriScienceGroup home
Health, Safety and Security

Electrical Safety in the Workplace

Electrical incidents are comparatively rare and disproportionately severe, and most happen during work that somebody judged too small to warrant the full procedure. This course covers the safety system that prevents them. Delegates work through the hazards of shock and arc flash and how each injures, risk assessment and the boundaries it establishes, and safe working practice including isolation, locking, testing for dead and earthing. Personal protective equipment is covered as the last defence rather than the first control. Competence, authorisation and the permit to work system are treated as the structure that makes the practice reliable, and the course closes on emergency response, rescue and incident investigation.

Course objectives

  • Explain how electrical shock and arc flash injure, and at what thresholds
  • Carry out an electrical risk assessment and establish working boundaries
  • Apply isolation, locking, testing for dead and earthing correctly
  • Select personal protective equipment as a last defence
  • Operate a permit to work and authorisation system
  • Plan emergency response and rescue from an electrical incident
  • Investigate an electrical incident and act on the findings

Who should attend

  • Electricians, technicians and electrical supervisors
  • Health and safety practitioners
  • Authorising officers and permit issuers
  • Engineers and managers responsible for electrical work
  • Contractors working on client electrical systems

Course outline

  1. 01How electricity injures: shock and arc flash
  2. 02Risk assessment and working boundaries
  3. 03Isolation, locking and tagging
  4. 04Testing for dead and applying earths
  5. 05Personal protective equipment as the last defence
  6. 06Competence, authorisation and permit to work
  7. 07Working practice on and near live equipment
  8. 08Emergency response, rescue and incident investigation

Scheduled sessions

Scheduled sessions for Electrical Safety in the Workplace
DatesVenueFormatPriceRegister
4 to 6 November 2026Nairobi, KenyaClassroomUSD 995 per delegateRegister Now
25 to 27 November 2026Accra, GhanaClassroomUSD 995 per delegateRegister Now
7 to 9 December 2026OnlineOnlineR6,500 per delegateRegister Now
23 to 25 December 2026Maputo, MozambiqueClassroomUSD 995 per delegateRegister Now
18 to 20 January 2027Lagos, NigeriaClassroomUSD 995 per delegateRegister Now
3 to 5 March 2027Dar es Salaam, TanzaniaClassroomUSD 995 per delegateRegister Now

Electrical Safety in the Workplace

From R6,500

AskRegister